Colored Stainless steel coil Manufacturer, colorful stainless steel plate/sheet Stockholder, SS coil/ strip Exporter In CHINA.
(1) Stainless steel grades that can be manufactured
We are often asked about the materials that can be used to finish stainless steel vibration finish.
Stainless steel, titanium, aluminum, copper, brass, and other materials used in everyday life can be used.
Let’s focus on stainless steel.
The base grade of stainless steel for general-purpose stainless steel vibration finish is basically SUS304 and SUS201.
Depending on the combination of gloss and surface quality, customers may choose to use SUS304 No.2B or SUS304BA.
Looking at the current order situation, the number of orders for SUS201BA and SUS304BA base metal has been decreasing recently.
Stainless steel vibration finishes are used for elevator doors, fittings, store fixtures, and kitchens.
There is a key point here: if the welded structure needs to be modified, partial repair or modification of the welded area is required if there is a possibility of on-site repair.
In order to match the color, tone, and luster of the normal stainless steel vibration surface, stainless steel vibration finishes that have undergone a polishing process called “base polishing” are suitable.
For products that are simply bent, stainless steel vibration finish from SUS304 NO.2B base material is used.
Now, SUS304 NO.2B is a general-purpose stainless steel. There is a risk of first rusting in salt-damaged areas (near the sea), places with heavy NOx SOx, yellow sand, PM2.5, and places with good acid rain.
Therefore, high corrosion resistant stainless steels such as SUS316, SUS445, NSSC220M, NSSC2351, etc. are used as stainless steel grades in these areas these days.
In other words, stainless steel vibration finish can be finished on almost any stainless steel grade.
(2) Is it possible to finish stainless steel with a rough surface, such as hot-rolled steel No.1 and Hot-type steel?
We often hear about this too.
As it turns out, it is possible to finish stainless steel vibration finish even if the surface condition of the hot material is uneven.
The surface of the hot material is smoothed by grinding (a non-cutting design finishing process) to form the base material. By doing so, a beautiful stainless steel vibratory finish can be applied.
In addition to plate shapes, stainless steel vibration finish can also be applied to long shapes, such as steel shapes, round pipes, square pipes, and flat bars.
Because of the difficulty of transportation, almost up to 6m is the general-purpose product.
(3) Is it possible to finish shaped objects or laser cut shapes?
It is possible to finish laser cut stainless steel into cold-rolled or hot-rolled materials.
However, in the case of hot-rolled material, grinding marks may appear due to the grinding and polishing process described above.
Next is the case of three-dimensional shapes, which requires a longer meeting.
If there are a lot of welded parts or complicated bent shapes, there are several patterns to be finished.
(1) Stainless steel vibration finish plate shape polishing process ⇒ Shape forming, welding process ⇒ Modified vibration polishing
(2) Pre-polishing process ⇒ Shaping, welding process ⇒ All modified polishing process ⇒ Finish vibration finish
This is approximately how the process works.
This process is the same for bead blast finish.
It is necessary to decide the processing method based on the final product to be finished.
This is a complex case.
This kind of complex case often occurs in high-end applications such as doors, kitchens, store fixtures, and signs.
(4) Support for customization
There are several design variations in the basic pattern.
It is possible to customize the size of the object or symbolic case.
It is possible to customize the eccentricity speed, speed, and pressure.
However, if the customization is not done within the scope of processing correction, it may not be possible to fix the problem after processing, even if the shape of the plate is good.
(5) How do you finish small items and correct welding?
We, JINBAICHENG METAL a design metal manufacturer, use our own facilities to manufacture stainless steel vibration finish products.
JINBAICHENG METAL MATERIALS LTD. is Manufacturer & Exporter of stainless steel coil /sheet/plate/strip.
We have customer from Philippines, Pune, Bengaluru, Dahej, Thane, Mexico, Turkey, Pakistan,Oman, Israel, Egypt, Arab,Vietnam, Myanmar, India, German, etc.
If you need stainless steel products, you can feel free to contact us, the best price for you~
Website: https://www.jbcsteel.cn
Email: lucy@sdjbcmetal.com jinbaichengmetal@gmail.com
Post time: Jan-03-2023